Unrecoverable error for result '(result)' ( - exit code -'(number)' ('(hex-number)'))
From Unofficial BOINC Wiki
Contents |
[edit] General
Message Type: Error Message
This Message means that the BOINC Client Software, Science Application, or Operating System encountered a severe error. It should be noted that these errors may not indicate a specific problem with the software, but may be the result of a confluence of stray interactions that produces, um, a negative effect.
These messages are called "Stop" messages for Microsoft Windows®. The messages and common ways to determine what and why these error are happening are in a Microsoft Knowledge Base Article.
Common causes of these errors can be:
- Over stressed hardware, usually by heat.
- Flaky, or bad device drivers.
- An actual problem (Bug) in the BOINC Client Software, Science Application, or Operating System.
- A bad Work Unit (usually a rare occurrence).
These errors have been sighted in all BOINC Powered Projects, so, the examples are merely typical occurrences.
- Note:
- Even though the "death" seems to point to one application or another, there is no telling from this message where the error really occurred. The error usually points at the Science Application but may well be something like a device driver.
[edit] Things to Check
You should report your problem to the appropriate board for each of the projects as you may get better help there.
Also you could check various hardware related issues like:
- Is your system stable? (see How-To Test Machine Stability)
- Is your CPU cooling up to the job?
- Is there adequate ventilation inside your case?
- Have you checked all fans and cleaned the inside to remove dust buildup? (see How-To Do Basic Hardware Maintenance)
- Is the ambient temperature of the room too high?
- Can you setup a motherboard monitoring program to look at temperature fluctuations?
- Can you swap memory sticks and see if the problem goes away?
- Are you "overclocking" at all?
[edit] Version Information
- None.
[edit] Example Log(s)
[edit] Exit Code -1073741819 (0xc0000005))
This is occurring a lot on Phase changes in Climateprediction.net. Often occurs after the usual Microsoft Windows® message that "Hadsm has crashed do you want to report it to Microsoft?". It is well worth trying to bring up the BOINC Daemon and exit it BEFORE clicking 'Don't Sent'. It might be wise to take a backup to a different from normal location. Starting the BOINC Client Software again will often allow it continue without error.
2005-06-07 07:43:04 [climateprediction.net] Restarting result 2pvt_300148139_1 using hadsm3 version 4.12
2005-06-07 08:32:41 [climateprediction.net] Unrecoverable error for result 2pvt_300148139_1
( - exit code -1073741819 (0xc0000005))
2005-06-07 08:32:41 [---] request_reschedule_cpus: process exited
2005-06-07 08:32:41 [climateprediction.net] Deferring communication with project for 59 seconds
2005-06-07 08:32:41 [climateprediction.net] Computation for result 2pvt_300148139_1 finished
Line-By-Line Explanation
- And now it has restarted processing. There is little difference between "Resuming" and "Restarting", "Resuming" occurs if the Result's information is still resident in memory and the "Restarting" indicates a reload of the in-progress information.
- Unrecoverable error for result '(result)' ( - exit code -'(number)' ('(hex-number)'))
- There was a severe error in the processing this Result and we had a "death" type ending to the Science Application.
- This message indicates that we will use Exponential Back-Off to calculate a time interval to wait before attempting to make another try to upload the file to the Project's Data Server.
- Drat! We died ...
[edit] Exit Code -1073741674 (0xc0000096))
Work climateprediction.net 6/17/2005 09:20:00 562 Deferring communication with project for 59 seconds Work --- 6/17/2005 09:20:00 561 request_reschedule_cpus: process exited Work climateprediction.net 6/17/2005 09:20:00 560 Unrecoverable error for result 44dx_100214237_1 ( - exit code -1073741674 (0xc0000096)) Work Einstein@Home 6/17/2005 09:19:47 559 Pausing result H1_0270.5__0270.6_0.1_T19_Fin1_1 (left in memory) Work --- 6/17/2005 09:19:47 558 Suspending computation and network activity - user is active Work SETI@home 6/17/2005 09:03:28 557 Pausing result 05no03aa.15866.20848.247158.107_4 (left in memory) Work Einstein@Home 6/17/2005 09:03:28 556 Resuming result H1_0270.5__0270.6_0.1_T19_Fin1_1 using einstein version 4.79 Work --- 6/17/2005 09:03:28 555 schedule_cpus: time 3600.076656
Line-By-Line Explanation
- None yet.
[edit] Exit Code -1073741502 (0xc0000142))
This is a Microsoft Windows® "stop" error. This specific error is most likely related to an error initializing a Dynamic Link Library.
Unrecoverable error for result 2f9b_200134233_0 ( - exit code -1073741502 (0xc0000142))
Line-By-Line Explanation
- Unrecoverable error for result '(result)' ( - exit code -'(number)' ('(hex-number)'))
- There was a severe error in the processing this Result and we had a "death" type ending to the Science Application.
[edit] Exit Code -1073807364 (0x40010004)
This is usually due to a graphics crash. This can happen because something else is using the graphics, or alternatively you're displaying the graphics and kill the graphics window via Task manager or answering 'Yes' to Microsoft's 'this program is not responding, kill it?' question.
[edit] Other Related Messages
- None.
RSS Feeds
