Test Page

From Unofficial BOINC Wiki

Contents 1 General Rubbish Test Page 1 2 General Rubbish from here down 3 Test 1 3.1 Temporarily Failed Download Of '(file)': System Connect 3.1.1 Line-By-Line Explanation 4 test 2 4.1 Temporarily Failed Download Of '(file)': System Connect 4.1.1 Line-By-Line Explanation 5 work unit name test 1 (approved)

[edit] General Rubbish Test Page 1

Feel free to try anything you want on this page. This page is here specifically for trying stuff!

[edit] General Rubbish from here down

testing!!

[edit] Test 1

[edit] Temporarily Failed Download Of '(file)': System Connect

The error-text "System I/O" replaces old Error Code -107. This specific error means that we are unable to contact and connect to the Data Server.

(1) 2005-09-10 23:27:08 [SETI@home] Started download of 03oc03ab.20315.8144.553406.231
(2) 2005-09-10 23:28:23 [SETI@home] Temporarily failed download of
                                    03oc03ab.20315.8144.553406.231: system connect
(3) 2005-09-10 23:28:23 [SETI@home] Backing off 1 minutes and 0 seconds on download of file
                                    03oc03ab.20315.8144.553406.231
(4) 2005-09-10 23:29:23 [SETI@home] Started download of 03oc03ab.20315.8144.553406.231
(5) 2005-09-10 23:29:38 [SETI@home] Finished download of 03oc03ab.20315.8144.553406.231
(6) 2005-09-10 23:29:38 [SETI@home] Throughput 24029 bytes/sec

Line-By-Line Explanation

1. Started download of '(file)'
   • We start the process to get a file from the Data Server.
2. Temporarily failed download of '(file)': '(error-text)'
   • But, we cannot contact the Data Server. Note that lapse of time ...
3. Backing off 'x' hours 'y' minutes and 'z' seconds on download of file '(file)'
4. Started download of '(file)'
   • Again, we start the process to get a file from the Data Server.
5. Finished download of '(file)'
   • And we succeeded in obtaining the file.
6. Throughput 'x' bytes/sec
   • With the specified data transfer rate.

[edit] test 2

[edit] Temporarily Failed Download Of '(file)': System Connect

The error-text "System I/O" replaces old Error Code -107. This specific error means that we are unable to contact and connect to the Data Server.

1. 2005-09-10 23:27:08 [SETI@home] Started download of 03oc03ab.20315.8144.553406.231
2. 2005-09-10 23:28:23 [SETI@home] Temporarily failed download of 03oc03ab.20315.8144.553406.231: system connect
3. 2005-09-10 23:28:23 [SETI@home] Backing off 1 minutes and 0 seconds on download of file 03oc03ab.20315.8144.553406.231
4. 2005-09-10 23:29:23 [SETI@home] Started download of 03oc03ab.20315.8144.553406.231
5. 2005-09-10 23:29:38 [SETI@home] Finished download of 03oc03ab.20315.8144.553406.231
6. 2005-09-10 23:29:38 [SETI@home] Throughput 24029 bytes/sec

Line-By-Line Explanation

1. Started download of '(file)'
   • We start the process to get a file from the Data Server.
2. Temporarily failed download of '(file)': '(error-text)'
   • But, we cannot contact the Data Server. Note that lapse of time ...
3. Backing off 'x' hours 'y' minutes and 'z' seconds on download of file '(file)'
4. Started download of '(file)'
   • Again, we start the process to get a file from the Data Server.
5. Finished download of '(file)'
   • And we succeeded in obtaining the file.
6. Throughput 'x' bytes/sec
   • With the specified data transfer rate.

[edit] work unit name test 1 (approved)

In the LHC@Home Project, for example, the Work Unit Name breaks down as follows:

Work Unit Name: wjun4B_v6s4hhpac_mqx__9__64.2914_59.3077__6_8__6__10_1_sixvf_boinc12302

Name Part	Description
wjun4B	A workspace directory name
v6s4hhpac_mqx	The study name where:
v6s4	LHC Version 6 Subversion 4
hhpac_mqx	Just a name for the particular physics case
9	The current seed number (typically between 1 and 60) representing a set of magnet errors
64.2914_59.3077	The tunes x and y (the current topic of investigation)
6_8	The initial amplitude range of the tracked particles
6	The order of the the number of turns 1000000
10	The initial angle in phase space (between 0 and 90 degrees)
1_sixvf_boinc12302	Identification string for the BOINC System

Note:

When the Work Unit is split into Results and sent out to Hosts for processing a Result Identifier is appended to the Work Unit Name. The format is "_#". The underscore ("_") separates the Result Identifier from the Work Unit Name. The "#" is replaced with the sequence number beginning with zero (0).